- Models: MH-3848Ax120 (1–3 layer)
- Pressing
About the Hot Press
Where a cold press relies on time, a hot press relies on heat: heated platens cure the glue line in minutes instead of hours, which is what makes veneering, flush door production and thermoset laminate work commercially viable at volume.
The MH-3848A series gives 120 tonnes of total thrust across a 1300 × 2500 mm platen, carried on eight oil cylinders. Single, two and three daylight versions let you match press capacity to the batch size you actually run.
Key features
- 120 t total thrust across a 1300 × 2500 mm platen
- Eight ø85 mm oil cylinders for even pressure distribution
- Hot oil circulation with dedicated 1.5 kW pump
- Available as 1, 2 or 3 daylight press
- Heating pipe power scaled to daylight count (18 / 27 / 36 kW)
Technical specifications
| Parameter | 1 Layer | 2 Layer | 3 Layer |
|---|---|---|---|
| Press platen dimensions | 1300 × 2500 × 42 mm | 1300 × 2500 × 42 mm | 1300 × 2500 × 42 mm |
| Max. total thrust | 120 t (3.7 kg/cm²) | 120 t (3.7 kg/cm²) | 120 t (3.7 kg/cm²) |
| Pressure of hydraulic system | 265 kg/cm² | 265 kg/cm² | 265 kg/cm² |
| Max. platen opening | 380 mm | 170 mm | 100 mm |
| Oil cylinder | ø85 × 8 pcs | ø85 × 8 pcs | ø85 × 8 pcs |
| Hydraulic motor power | 4 kW | 4 kW | 4 kW |
| Hot oil pump power | 1.5 kW | 1.5 kW | 1.5 kW |
| Heating pipe power | 18 kW | 27 kW | 36 kW |
| Overall dimensions | 370 × 166 × 204 cm | 370 × 166 × 204 cm | 370 × 166 × 204 cm |
| Net weight | 5225 kg | 6240 kg | 7255 kg |
Design and specifications are subject to change without prior notice.
Typical applications
- Veneer pressing
- Flush door production
- Thermoset laminate bonding
- Block board and panel lay-up